I graduated from Purdue University in January 1970 with a dual degree in Journalism and History. I tried to make a "go" of self-publishing but failed. Consequently, I took a real job in March 1972 as Managing Editor for "The Zionsville Times" in Zionsville, Indiana.
The owner of the newspaper was a pompous jerk who had nothing but contempt for his advertisers and subscribers. Right from the "git go" the local folks urged me to start up a newspaper to compete with "The Zionsville Times." Considering that The Times was founded in 1860, that seemed an impossible dream.
Finally, however, my wife and I started "The Zionsville Main Street" newspaper on August 8, 1972. It sold for "one red cent" and was printed on Tuesday, Thursday and Saturday on both sides of a single 11 by 17 sheet of paper. I made my reputation for that newspaper by covering every single call out of the local volunteer fire department and also by getting the Friday night football game results into the next morning's newspaper.
Within one year, we captured 90% of the advertisers and subscribers from The Times. The owner absconded town in the middle of the night. The former owner then sold us The Times for pennies on the dollar. At that point, we were well positioned for long term success.
Even though we could have backed off our intensive coverage of fires and traffic accidents, we decided to become even more dedicated to such coverage and eventually won a state press association award for our photo coverage of various tragedies.
One night I went out to the scene of a very sad fatality. The drunk driver of the early 70's muscle car had been go going too fast, the car went airborne completely across a wide creek. While in mid-air, the car turned upside down and sideways and t-boned into a large hardwood tree on the other side of the creek. The impact killed the passenger instantly. However, the drunk driver, as is often the case, survived although he was badly injured.
I took a lot of photos of the grisly scene, including the empty beer cans strewn everywhere and duly reported the facts of the situation.
Meanwhile, time passed. One morning, I was sitting in my office shuffling papers and answering phone calls when I heard a really loud noise and a gasp from our elderly receptionist, Viola. An enraged young male burst into my office shouting obscenities at the top of his lungs.
His eyes were bloodshot. His face was scarred with fresh stitches and his right arm was in a sling. He rushed to my desk and began shouting that he was going to kill me. It was the driver of the car in the incident described above.
The man went on and on about how he would have killed me right then and there if he had use of his right arm or had a gun. He said he was going to kill me just as soon as he could and shouted obscenities about my coverage of the fatal wreck in which he had been the drunk driver.
Finally, he stormed back out of the office with as much noise and bluster as he could muster. My Staff and I were in shock. Some of the women were crying while others simply sat at their desks and stared with a blank look on their faces.
I leaped from my desk and practically ran to the nearby Town Marshall's Office to report the threatening incident. The Marshall was an Old Man on the tail end of a long law enforcement career. He listened patiently and calmly reached into his desk and pulled out what looked like a Doctor's prescription pad.
While he was still listening to me, he scribbled something on the pad. Then he looked me straight in the eyes with his old, steel gray stare and said, "John, I have no doubt that man will kill you unless you protect yourself. I can't protect you. Only you can protect yourself. Here is a permit to carry a concealed pistol. Go to the Barber Shop, tell Bill The Barber to take you to the gun shop in Lebanon, Indiana, right now. Buy whatever pistol Bill tells you to buy. Learn how to use it before you come back to Zionsville. Carry it where ever you go and sleep with it at night. Good Luck."
And that was it. He had said his piece. Well, I took the paper and shook his hand and then practically ran to the small town's only barber shop. Bill Cripe was the barber. Bill was almost always asleep in one of his barber chairs, all stretched out and snoring like a freight train. If you wanted a hair cut, you had to shake Bill and wake him up. After he shook off his nap, he'd be ready to cut your hair.
Bill kept an old hog leg 45 Long Colt revolver just out of sight but always at easy reach. He was fond of pulling out that 10-inch barrel blunderbuss to wave it around once in awhile. "No body better mess with me," he'd say and then he'd put that howitzer back in its place.
Well, I shook Bill awake and blurted out my story and Bill was wide awake faster than I'd ever seen him rally up. The second I finished my story he just, "Let's GO!" and he hung his "Closed" sign and locked the door and we hurried north to the Boone County Seat in Bill's old beater Buick four-holer.
Bill talked about how the Lebanon gun shop had been around forever going back to his Grand Dad's Days but he said the shop didn't ever carry much inventory. He said we'd have to take whatever they had, even if it wasn't the perfect pistol. We made it to Lebanon in record time taking short cuts on gravel roads and fish tailing around country cornfield corners.
We hurried into the gun shop so fast we startled the owner and Bill yelled out, "It's me, Jake, calm down."
Bill went right to the pistol case and practically shouted out the word "YES!" He turned and said, "I can't believe it, John, they got the perfect pistol for you--an Airweight!"
Well, heck, at that time, I didn't know the difference between and Airweight and an Airhead. Bill said, "Show him your paper from The Marshall." I pulled out the wrinkled slip and the shop owner smiled and put the boxed pistol in my hands and said, "This pistol will serve you well as long as you live."
Bill also picked out an old H&R nine shot .22 revolver with a really long barrel. He made me buy a bunch of ammo for both of them and then we drove to a gravel pit to start shooting. My hand was plumb wore out but the time we got back to Zionsville around dinner time.
Bill said, "I'll spread the word around town that you're armed and dangerous and you know how to shoot your Airweight. I doubt that guy will now ever make his attempt to kill you, John, but carry your Airweight everywhere and sleep with it. Practice every chance you get and let it be known you won't back down."
Well, Zionsville was a tiny town back then, perhaps 650 people. Gossip was a mainstay of the little town's culture. Bill The Barber was arguably the town's leading male gossiper. So, it was no surprise the story of the death threat and our trip to Lebanon made it all around town before the sun went down that day. By morning, everyone had heard several versions of the story.
Fortunately, I never saw the perp of the death threat again. However, I was still looking over my shoulder over a year later. Only when I heard he had left the area and moved far out-of-state did I begin to relax my guard.
Thus began a 40+ year relationship with The Airweight. There are plenty more stories to tell. We will attempt to add stories as time and inclination become available.
Friday, August 15, 2014
Friday, February 28, 2014
The First Shot
IDPA is a fun sport. However, it is complex and fun can turn to frustration with a single shot. That single shot is usually your first shot right after the buzzer.
If there is ONE shot to practice, it is your First Shot. The first shot sets the tone for how well (or not so well) you shoot a Scenario Stage or a Skills Exercise. If you blow your first shot, you will be behind the eight ball both mentally and "on the clock."
As Tom B. says, "Shooting is 90% mental and the rest of it is in your head." There's something about missing that first shot that sticks with you for the entire stage and can actually affect your match performance as well. Getting off decent first shots is very important in "The Game of IDPA."
Many Thanks to Pat D. for helping us load up a new batch of .45 ACP ammo Thursday and Friday. THANKS, Pat. After finishing our reloading chores today we decided to both test some of the fresh rounds and also to being a new chapter of "focused practice."
Virtually all IDPA Matches require the use of a "concealment garment." This is typically a button down shirt (worn open) that fully covers both your pistol and your magazine holder. Many guys and gals I know in Idaho use Hawaiian shirts for their concealment garment. Some matches look like some kind of Jimmy Buffet Party!
I use an old Forest Service shirt I bought at a thrift store in Challis, Idaho, for 50 cents. I've added some embroidery to it to cover the unfaded area were the Forest Service emblem was once located. There's a lot of debate about what constitutes a competitive concealment garment. "Whatever works," is my motto.
We haven't been enforcing the Concealment Garment Rule at our Monday Matches simply because the danged shirt gets in the way and it can really cause people to goof up. If you are new to the game, it can be a safety hazard as well. We feel not using concealment garments both equalizes the playing field and increases match safety.
However.....since we're going back into The Real World of IDPA, we have to get back into wearing and using a concealment garment. Clearing your garment is an essential part of your First Shot in IDPA. If you can't clear the garment and get off a good shot, you're in trouble right from the git go. No way to sugar coat it.
So, anyway, it's back to using a concealment garment from here out until the end of our Monday Match Season. I have to use the garment all summer long up in Idaho so I might as well get back with the program.
OK, we have digressed a bunch here but you needed to know all that stuff to understand our shooting exercise here on the last day of February.
Initially, our main objective was testing the rounds we loaded today. However we simply didn't want to shoot aimlessly just to test rounds. That's how we invented this new one-man game called "The First Shot."
We set up the timer behind us and set it to buzz at 3 seconds. Three seconds is enough time to turn and be ready for the buzzer. Then we set a target at 7 yards. We buzzed ourself through 26 rounds trying to go as fast as possible. We were really rippin' and snortin' with the concealment garment.
The rounds were all great and wonderful and we are pleased with the ammo but we shot terrible, actually. Going into the last 10 rounds we had three straight MISSES! That really stung straight to the shooting soul.
Anyway, we packed up the target stand and picked up our casings and drove home with our tail between our legs.
As we pulled into our driveway we thought about cleaning the pistol and then The Light Bulb went off. DUH! How could have we have forgotten such an important lesson so quickly????
Here's the lesson in a nutshell: "It's better to take your time on The First Shot and get it right than to be super fast."
Bear in mind a miss is Five Points Down. By IDPA rules, Points Down are divided by two and then magically become seconds. So a miss is 2.5 seconds added to your score. So, let's say I had a 2.04 time on The First Shot but The First Shot was a miss. That means the first shot would be scored as 4.54 seconds! YIKES!
Do you see where I am going with this? You can S-L-O-W Down and take longer to place the first shot and set the tone for your Course of Fire and avoid costly mistakes that add gobs of time to your net score.
So, I sat in the driveway debating whether to clean the pistol and give it yet another Good Old College Try. Yeah, you know which one won, don't you? I grabbed another 20 rounds and headed back out to reapply a lesson I already knew but forgot.
Naturally, the results were remarkable. Yeah, my First Shot times were slightly slower but they were a WHOLE LOT more accurate. After factoring the penalties, taking a little bit longer to place the shot, dramatically improved my net score on The First Shot.
Our of 46 First Shots only one was great than 3 seconds and that's because I got hung up with the concealment garment. Remarkably, my fastest net time was 1.95 for the first shot. It must have been a lucky one.
The fastest raw time was 1.65 but it scored a "3" so it's actual net time would be 3.15.
I had a 1.91 with a score of one but that equates to 2.45.
My basic "take away" from these two exercises today is that The First Shot is almost certain to be 3 seconds or less. With that in mind, I might as well make those first three seconds count and avoid getting any penalties added to my raw time.
What are the odds of shooting a "ZERO" in under 2 seconds drawing from concealment? Slim and None and Slim just left town. Yes, it can be done but will it be done? Not likely for all us normal shooters. So, add a split second and slow it down and place the shot where it belongs.
That's the lesson. Slow it down. Take an extra split second to actually AIM! What a novel idea!
If there is ONE shot to practice, it is your First Shot. The first shot sets the tone for how well (or not so well) you shoot a Scenario Stage or a Skills Exercise. If you blow your first shot, you will be behind the eight ball both mentally and "on the clock."
As Tom B. says, "Shooting is 90% mental and the rest of it is in your head." There's something about missing that first shot that sticks with you for the entire stage and can actually affect your match performance as well. Getting off decent first shots is very important in "The Game of IDPA."
Many Thanks to Pat D. for helping us load up a new batch of .45 ACP ammo Thursday and Friday. THANKS, Pat. After finishing our reloading chores today we decided to both test some of the fresh rounds and also to being a new chapter of "focused practice."
Virtually all IDPA Matches require the use of a "concealment garment." This is typically a button down shirt (worn open) that fully covers both your pistol and your magazine holder. Many guys and gals I know in Idaho use Hawaiian shirts for their concealment garment. Some matches look like some kind of Jimmy Buffet Party!
I use an old Forest Service shirt I bought at a thrift store in Challis, Idaho, for 50 cents. I've added some embroidery to it to cover the unfaded area were the Forest Service emblem was once located. There's a lot of debate about what constitutes a competitive concealment garment. "Whatever works," is my motto.
We haven't been enforcing the Concealment Garment Rule at our Monday Matches simply because the danged shirt gets in the way and it can really cause people to goof up. If you are new to the game, it can be a safety hazard as well. We feel not using concealment garments both equalizes the playing field and increases match safety.
However.....since we're going back into The Real World of IDPA, we have to get back into wearing and using a concealment garment. Clearing your garment is an essential part of your First Shot in IDPA. If you can't clear the garment and get off a good shot, you're in trouble right from the git go. No way to sugar coat it.
So, anyway, it's back to using a concealment garment from here out until the end of our Monday Match Season. I have to use the garment all summer long up in Idaho so I might as well get back with the program.
OK, we have digressed a bunch here but you needed to know all that stuff to understand our shooting exercise here on the last day of February.
Initially, our main objective was testing the rounds we loaded today. However we simply didn't want to shoot aimlessly just to test rounds. That's how we invented this new one-man game called "The First Shot."
| I stood next to the milk crate so the timer was somewhat close to how it would be in a real match. |
The rounds were all great and wonderful and we are pleased with the ammo but we shot terrible, actually. Going into the last 10 rounds we had three straight MISSES! That really stung straight to the shooting soul.
Anyway, we packed up the target stand and picked up our casings and drove home with our tail between our legs.
As we pulled into our driveway we thought about cleaning the pistol and then The Light Bulb went off. DUH! How could have we have forgotten such an important lesson so quickly????
Here's the lesson in a nutshell: "It's better to take your time on The First Shot and get it right than to be super fast."
Bear in mind a miss is Five Points Down. By IDPA rules, Points Down are divided by two and then magically become seconds. So a miss is 2.5 seconds added to your score. So, let's say I had a 2.04 time on The First Shot but The First Shot was a miss. That means the first shot would be scored as 4.54 seconds! YIKES!
Do you see where I am going with this? You can S-L-O-W Down and take longer to place the first shot and set the tone for your Course of Fire and avoid costly mistakes that add gobs of time to your net score.
So, I sat in the driveway debating whether to clean the pistol and give it yet another Good Old College Try. Yeah, you know which one won, don't you? I grabbed another 20 rounds and headed back out to reapply a lesson I already knew but forgot.
Naturally, the results were remarkable. Yeah, my First Shot times were slightly slower but they were a WHOLE LOT more accurate. After factoring the penalties, taking a little bit longer to place the shot, dramatically improved my net score on The First Shot.
Our of 46 First Shots only one was great than 3 seconds and that's because I got hung up with the concealment garment. Remarkably, my fastest net time was 1.95 for the first shot. It must have been a lucky one.
The fastest raw time was 1.65 but it scored a "3" so it's actual net time would be 3.15.
I had a 1.91 with a score of one but that equates to 2.45.
My basic "take away" from these two exercises today is that The First Shot is almost certain to be 3 seconds or less. With that in mind, I might as well make those first three seconds count and avoid getting any penalties added to my raw time.
What are the odds of shooting a "ZERO" in under 2 seconds drawing from concealment? Slim and None and Slim just left town. Yes, it can be done but will it be done? Not likely for all us normal shooters. So, add a split second and slow it down and place the shot where it belongs.
That's the lesson. Slow it down. Take an extra split second to actually AIM! What a novel idea!
Wednesday, February 19, 2014
The IDPA Classifier
I'd like to talk today about The IDPA Classifier.
A perennial question is: "Should I practice The Classifier?"
And the equally perennial answer is: "NO! You shouldn't practice the Classifier BUT you SHOULD practice the SKILLS involved in the Classifier."
The IDPA Classifier is "The Great Equalizer" between A-L-L IDPA members in 50 countries worldwide. There's a reason it's called the "International," ya know?
By shooting the Classifier you automatically join an elite worldwide group of shooters who have agreed to play by the same rules while perfecting Real World Skills that may someday save your bacon.
The IDPA Classifier is Great Shining Beacon in our sport akin to that famous saying at America's Statue of Liberty. The Classifier harks back to this:
“Give me your tired-eyed, your poor aim, your huddled masses yearning to shoot free.”
Yeah, that's what the Classifier is all about if you get right down to it. It's The Second Amendment Personified. But I digress.
Anyway, we convened this blog post to talk about how better to prepare for The Classifier. And this harks back to the "Skills Issue." Yes, it is MUCH better to practice the SKILLS involved in the Classifier than the Classifier itself.
We just recently began coaching a new IDPA Member for her first Classifier. As they say, "The Best Way To Learn Is To Teach." My so-called "coaching" has turned into a First Class Learning Experience as far as "prep" for The Classifier goes.
What I am learning now really helps me understand what it means to "practice the skills" instead of practicing the match. Meanwhile, it has helped me learn how much I must learn to once again maintain my Marksman Classification in IDPA.
I am PROUD of IDPA for such a great consensus Rule Book. We are part of an exceptional organization.
Happy Shooting! John Parsons.
A perennial question is: "Should I practice The Classifier?"
And the equally perennial answer is: "NO! You shouldn't practice the Classifier BUT you SHOULD practice the SKILLS involved in the Classifier."
The IDPA Classifier is "The Great Equalizer" between A-L-L IDPA members in 50 countries worldwide. There's a reason it's called the "International," ya know?
By shooting the Classifier you automatically join an elite worldwide group of shooters who have agreed to play by the same rules while perfecting Real World Skills that may someday save your bacon.
The IDPA Classifier is Great Shining Beacon in our sport akin to that famous saying at America's Statue of Liberty. The Classifier harks back to this:
“Give me your tired-eyed, your poor aim, your huddled masses yearning to shoot free.”
Yeah, that's what the Classifier is all about if you get right down to it. It's The Second Amendment Personified. But I digress.
Anyway, we convened this blog post to talk about how better to prepare for The Classifier. And this harks back to the "Skills Issue." Yes, it is MUCH better to practice the SKILLS involved in the Classifier than the Classifier itself.
We just recently began coaching a new IDPA Member for her first Classifier. As they say, "The Best Way To Learn Is To Teach." My so-called "coaching" has turned into a First Class Learning Experience as far as "prep" for The Classifier goes.
What I am learning now really helps me understand what it means to "practice the skills" instead of practicing the match. Meanwhile, it has helped me learn how much I must learn to once again maintain my Marksman Classification in IDPA.
I am PROUD of IDPA for such a great consensus Rule Book. We are part of an exceptional organization.
Happy Shooting! John Parsons.
Tuesday, April 9, 2013
1911 Tear Down & Assembly
Here is the link for the above video: http://youtu.be/BIIT0Dv2JVA
Here is the link for the above video: http://youtu.be/4P4XJTKzKEU
Friday, December 7, 2012
On Target
Gun Guru's Tom B's worked his magic on the trigger of our Youth Ranger .308. Oh, Boy, what a difference the trigger job made. We are VERY HAPPY!
Our three goals are very simple.
Our three goals are very simple.
- We want to relearn how to shoot from the free-style standing position with no support of any kind other than our hands, arms, legs, etc.
- We want to be able to get off our first shot within 2 seconds beginning with the rifle held in two hands at waist level.
- We want to consistently get four consecutive shots within an 8-inch circle at 100 yards.
![]() |
| It's all about the free-style standing position for us. |
We actually have a plan on how to accomplish these goals. The first part of the plan was to reduce the trigger pull. We quickly deduced it would be a waste of ammo to practice with a hard-to-pull trigger. We figured to might as well wait until the trigger was where we want it.
Secondly, we also have factored in using two .22 caliber rifles to relearn how to shoot from the free-style standing position. One is an ancient Winchester Model 67, probably made prior to WWII. The other is an old beater Marlin Model 60 semi-auto (tubular) that we bought almost 30 years ago in Flagstaff.
The idea is to alternate shooting all three rifles and to use the .22's to relearn response, body position, sight acquisition and shot timing.
We don't plan on using very much .308 ammo on any given day. Today, for example, we shot a grand total of 12 rounds of .308 in three sets of four rounds each.
Meanwhile, we shot maybe 30 rounds of .22 from the M67 single shot. We're really not too concerned about the accuracy of the .22 because we're simply using it to get the "muscle memory" part reacquired: Lift-Aim-Shot. Since it's a single shot, we have to reload after every shot and, naturally, that means you start back at square one on your next shot.
It's been decades since we shot the M67 using its original iron sights. It was such a wonderful pleasure to have those sights back on the rifle again today. It's a perfect training rifle and we are so happy to have it in our hands again. THANKS, TOM!
Meanwhile, we set up a target at 50 yards and have begun to practice with at that range. We will gradually work our way up to 100 yards. It's 50 yards first.
![]() |
| Most shooters aim for tight groups. We couldn't care less about tight groups. This is what we want to see--almost all our shots inside the 8-inch circle! |
We were shocked and surprised to see that 9 out of our 12 rounds with the .308 were inside the 8-inch circle. Note that the shot circled on the far right is actually two shots and they are essentially close enough to call "good." The 12th shot was one-half an inch outside out "goal zone." We are VERY HAPPY with those 12 shots and consider today's practice session a success. The trigger job and the warm up with the .22 really made all the different. There's simply NO way we could have been this good with the old hard trigger. It's exciting to see the difference the trigger made in today's practice. Likewise, it's really exciting to have that good ol' .22 single back in action. THANKS, TOM!
![]() |
| The target as it appears at less than 20 yards. |
Thursday, December 6, 2012
Winchesters
We had our Mentor & Guru work on not one but THREE Winchesters in a single day Wednesday, December 5th. Oh, what a Great Day that was.
First, Master Gunsmith Tom B. took an old 1960's scope off our ancient WIN Model 67. He then rummaged around his extensive shop and found an iron rear sight. He drifted that sight in practically with his eyes closed. The surface rust on the sight perfectly matched the rust on the barrel. They are a match made in Single Shot Heaven.
This Winchester Model 67 isn't just ANY single shot, it's our very first rifle we ever had. I am pretty sure I got it handed to me in 1954 or 1955 when I was 7 years old and got my first hunting license back in Indiana. It sure looks like this particular Model 67 was made prior to October 1944.
Here's a snippet from the Wiki on Model 67's:
"In place of the earlier chrome plating, blued finish was used on the bolt, trigger, and cocking piece starting in October 1944."
Source: http://en.wikipedia.org/wiki/Winchester_Model_67
Well, this Model 67 definitely has the chrome and not blue so "go figure."
Next up was the Model 94 lever action carbine in the timeless classic .30-30 caliber. Back in the 1980's we really wanted an Old Navajo Sheep Gun. We even put an ad in the newspaper trying to find one to buy in Northern Arizona.
After 25+ years later, we found one late last fall and bought it December 15, about an hour after we learned our Mom died. We knew we were going to have to go to Indiana and sell off all our childhood firearms so we bought this old beater WIN Model 94 .30-30 as a hedge that we would always have something to remember my Dad by and his love of firearms and collecting old, beat-up relics. This is a genuine old, beat-up relic, we can assure you of that.
Dear Friend Tom looked it over and pronounced it safe, savory and sharp to shoot. He then also pronounced, "This rifle is in better condition than 98-percent of the firearms on the entire Navajo Reservation." That sure made us feel good and cemented our new lifelong attachment to this old, worn, pitted, rusted relic. We plan to shoot the heck out of it now and maybe even hit something, too.
The final act of Tom's trifecta was doing a trigger job on our Wnchester Model 70 Youth Ranger in .308 caliber. Tom tweaked, twisted and thumbed his way through that trigger like a skilled surgeon. When he finished it, we were practically jumping for joy. It's as light as a feather and it's surely going to help us take our own big game to the next level.(pun intended)
It's not often in life that a guy gets three Winchesters worked on in a single day and gets to take them home that very same day. It's not often that a Dear Friend brings a couple of Winchesters back to life and breathes new sensitivity into a third Winchester.
It was definitely a "Winchester Kinda Day."
THANKS, Tom! YA DUN GOOD! I so appreciate what you did. Happy Shooting & Many Cheers!
jp
Thursday, March 15, 2012
He's Got Fluffy!
You are attacked by a pack of feral dogs and try to fight them off and protect your Little Fluffy. But The Big Dog gets Fluffy in his teeth and takes off like, well...A Big Dog! You have to take down The Big Dog before it's curtains for Fluffy!
Wednesday, March 14, 2012
No See Um's
Hers it is--introducing The No See Um's! They hide behind walls and pop up when you least expect it. They suddenly become your Tactical Priority target and you must immediately shift your point of aim and fire. HURRY! You have at best two or three seconds before the No See Um disappears behind hard cover! No See Um's travel is swarms. We expect to have at least four No See Um's deployed for the next match! Below are photos of the first draft prototype. We are in Version #2 right now and will probably make some further refinements in teh final draft versions. The first draft was too tall so we cut the second version down to six foot three inches. (Highest point of cardboard head.) The stand is designed to NOT allow the target to remain standing. As soon as the lineman lets go of the line, the target falls backwards and disappears behind the wall.
Additional notes are below these three photos.
The idea for this target came to us in the night last night. We built it within mere minutes at no cost using stuff that was lying around. We think the actual cost of building them (assuming use of cull lumber) will be under $5 for each target assembly.
We have already been thinking of how to use them in a Stage Design. The graphic below is one example.
The popper symbols would be No See Um's behind fake walls. As you shoot T1 (near at left), the first NSU pops up in time for you to shoot it after shooting T1. However, when you begin shooting T2, you won't know when the next NSU will pop up--when it does, you must stop shooting at T2 and attempt to shoot NSU #2. You shoot T3 while moving to distant cover and then engage T4. After shooting T4, NSU #3 pops up. You shoot it and then begin shooting at T5. You won't know when to expect NSU #4 to pop up. When it does, you must stop shooting at T5 to shoot NSU #4 and then resume trying to shoot T5.
Successfully shooting this type of a stage will be next to impossible.
Monday, February 27, 2012
The Joker
One of the many fun things about an IDPA match are the "moving" aspects. There can be moving targets or the shooter can be moving, perhaps both at the same time. Since we are now staging informal IDPA matches here in the desert near Montezuma Well, we thought it would be fitting to create a moving target. We spent about 4 hours February 25 building The Joker. This is what is known as a "swinger." In essence, such targets are pivoting pendulums with a cardboard target attached to the top.
Typically, these targets are made of welded steel so they can withstand the occasional miss without being destroyed. Since we are not a welder and since steel has become wildly expensive, we decided to build this target from Home Depot "cull" lumber. The cost of this contraption (so far) is $5. All the various hardware was stuff we had lying around.
There are several interesting aspects to this project. Since we are pretty certain the target holder will eventually get shot up, we made it to be easily replaceable and will carry two sets of replacement parts whenever it is used in a match. Even though the fully assembled structure is very heavy, it comes apart quickly and easily so it can be set up by one person. The counterweights are two circular thick steel plates obtained as a Mesa, Arizona scrapyard. We plan to use the plates to learn to "shoot steel" better. When the target is not being used, the plates come on and off easily. The "axle" for this target is a piece of half-inch threaded rod.
The target stem is held in the center between the two uprights by small pieces of 3/4 inch EMT conduit with large washers to reduce friction on the pendulum stem. We built the target on a windy day and we were having problems with the counterweight end hitting the bottom of the uprights. This was solved by pound a small piece of half inch copper pipe into the pivot hole. Now the stem does not rock on the threaded rod and will not hit or bind on the uprights, even in a high wind.
The embedded video runs 12 seconds. We are figuring the target will be actively swinging for at least 8-10 seconds which is plenty of time for a shooter to get off one, two or three shots, as this target will always be used in an ordinary Vickers stage.
The initial use of this target will be March 5th in a stage called "GPS & Joker's Wild." Here is a rough outline of the stage:
You are a writer for a golf magazine and have just attended a prestigious golf match in a big city. You are driving a brand new Buick with the latest and greatest onboard navigation system. After leaving the golf course, your GPS goes wild and leads you deep into the heart of the inner city's most feared gang known as The Jokers. The ruthless leader of The Jokers is six foot seven inches and loves to entertain his gang by going one-on-one with hapless adversaries while dancing to loud, obnoxious hip hop music in the background. While driving bewildered through gangland, someone shoots out the tires of your Buick and you must get out and defend yourself. First, you must take on The Big Joker himself. As you draw, he begins swinging wildly to the tune of the music. Once you have dispatched The Big Joker, you must engage T2-3 with two shots each while retreating around and behind the trunk of your Buick. Engage T5-6 from cover with two shots each, shooting to slide lock, and reloading if necessary. Then move to the hood of the Buick while reloading from behind cover.
(NOTE: If you shot to slide lock while engaging T6, you may drop the magazine on the ground. If you had to reload from slide lock to finish shooting T6, you must reload with retention from behind cover.)
Gang members shoot your gas tank and the rear of your Buick explodes in flames. You hear sirens but you know you must make a run for it to the safety of a low wall about 20 feet away. Shoot T7-9 with two rounds each while moving to the safety of the distant cover.
Saturday, December 10, 2011
Home grown IDPA match
Dear Friend and neighbor Gary W. and I decided to stage an informal two person IDPA-style match in our "backyard" shooting range--a location which is barely 3 miles from our actual backyards. We both live at the end of the pavement in this part of the Verde Valley.
It's classic Arizona highlands desert scrub vegetation and features a great backstop comprised of limestone deposited when the area was deep under the waters of an ancient lake. It's very rare to find someone else shooting in this area. There's a real nice open flat area totally free of trash and litter in which to spread out our targets. Perfect place for an informal IDPA match!
I designed four simple stages. Their photos are explained below. Gary paid the price to buy a brand new regulation range timer so we could record our stage times. Since Gary bought 50 official IDPA targets we were able to actually score the shots in the proscribed manner. We did use a couple of my own home grown Center of Mass targets to supplement Gary's targets. Gary came to visit us in Idaho Falls in August. We shot out at the SEIPS range and he was immediately smitten with the 2x4 target stands. When he returned to Arizona, he made six of them and they sure some in handy! This was also the first time we were able to use the newly minted cover structure. Altogether, we shot 100 rounds each. Gary was using his new FNH FNX 9mm and I shot my "new-to-me" XDM .45 ACP using cast lead 200 grain SWCBB bullets on 5.4 grains of Unique.
We shot the four stages at least twice each. It took Gary awhile to get the hang of the stages so we had him shoot them three or four times until he "got it right." We made notes of our times and "points down" and carried on a typically good-natured, friendly competition between each other. I easily beat him on three of the stages but he beat me by .09 of a second on one of the stages.
After finishing up the fourth stage, we then turned our attention to the 93-year-old Colt 1917 and shot 96 rounds (8 moon clips each). We both did very well at 7 yards and pretty good at 10 yards. Our accuracy at 20 yards was terrible. We obviously need a lot more practice at 20 yards. The Colt barrel isn't leading up any more. We're using 230 grain RNFB cast lead bullets that were tumbled in ALOX on 4.3 grains of Bulleye. The pistol is now very easy to clean and a joy to shoot. Hopefully, we will soon figure out how to lighten the DA trigger pull and also get better at 20 yards.
Here are all the photos with short notes below each one.
Stage One was put together for two rounds at each target from the left side of the cover followed by a reload with retention behind cover.
After the reload, the shooter was to put one round in each of the targets from behind cover.
This is the first half of Stage Two. The shots were to be taken from behind cover. I should have taken a better photo of this stage.
Here's the second half of Stage Two. There was no reload on this stage.
Stage Three was a lot of fun. The shooter was stationary for two shots to T1. Then, the shooter moved diagonally toward cover while placing two rounds in T2 & T3 while moving. Then the shooter placed two rounds in T4-6 in tactical sequence from behind cover
We really hit our stride in putting together Stage Four. This one was a real sweetie. The shooter placed two shots by drawing and firing with retention into the upper left circle at a distance of 3 feet. Then, the shooter ran to cover while placing two shots each in T2-4. The two shots in T2 had to be head shots because of the hostage. After reaching cover, the shooter had to place one head shot in T5 and T6 and then one shot in the upper left Center of Mass circle of T7. This was a Limited Vickers for a total of 11 rounds. (The other three stages were Vickers.) My best time on this stage was 9.19 seconds with all "zeros!" After four tries, Gary got his time down to 9.37 with all "zeros." It was a really fun stage.
Gary had never drawn and fired with retention. Here he is shown practicing the firing position.
After shooting the four stages, we also had a lot of fun with the 1917. The revolver is very accurate at 7 yards. Gary is very strong. He shot first and his first group at 7 yards was two inches. After the sixth shot he kept clicking through for another shot. I said, "You're done, Gary." And he turned and said, "I thought it was a .22 and there would be 9 rounds!" Very funny, Gary! There is a difference between the recoil of a .22 LR and a .45 ACP. But to Gary, the pistol felt as comfortable as a .22. Go figure.
A .22, huh?
Here's Gary's best group at 10 yards. Pretty spiffy shooting, Gary! I definitely didn't do as well as Gary did with the 1917 but I wasn't displeased with my shooting. I'd give my shooting a B grade and Gary's an A+ at the short distance.
Happy Shooting, jp
It's classic Arizona highlands desert scrub vegetation and features a great backstop comprised of limestone deposited when the area was deep under the waters of an ancient lake. It's very rare to find someone else shooting in this area. There's a real nice open flat area totally free of trash and litter in which to spread out our targets. Perfect place for an informal IDPA match!
I designed four simple stages. Their photos are explained below. Gary paid the price to buy a brand new regulation range timer so we could record our stage times. Since Gary bought 50 official IDPA targets we were able to actually score the shots in the proscribed manner. We did use a couple of my own home grown Center of Mass targets to supplement Gary's targets. Gary came to visit us in Idaho Falls in August. We shot out at the SEIPS range and he was immediately smitten with the 2x4 target stands. When he returned to Arizona, he made six of them and they sure some in handy! This was also the first time we were able to use the newly minted cover structure. Altogether, we shot 100 rounds each. Gary was using his new FNH FNX 9mm and I shot my "new-to-me" XDM .45 ACP using cast lead 200 grain SWCBB bullets on 5.4 grains of Unique.
We shot the four stages at least twice each. It took Gary awhile to get the hang of the stages so we had him shoot them three or four times until he "got it right." We made notes of our times and "points down" and carried on a typically good-natured, friendly competition between each other. I easily beat him on three of the stages but he beat me by .09 of a second on one of the stages.
After finishing up the fourth stage, we then turned our attention to the 93-year-old Colt 1917 and shot 96 rounds (8 moon clips each). We both did very well at 7 yards and pretty good at 10 yards. Our accuracy at 20 yards was terrible. We obviously need a lot more practice at 20 yards. The Colt barrel isn't leading up any more. We're using 230 grain RNFB cast lead bullets that were tumbled in ALOX on 4.3 grains of Bulleye. The pistol is now very easy to clean and a joy to shoot. Hopefully, we will soon figure out how to lighten the DA trigger pull and also get better at 20 yards.
Here are all the photos with short notes below each one.
Stage One was put together for two rounds at each target from the left side of the cover followed by a reload with retention behind cover.
After the reload, the shooter was to put one round in each of the targets from behind cover.
This is the first half of Stage Two. The shots were to be taken from behind cover. I should have taken a better photo of this stage.
Here's the second half of Stage Two. There was no reload on this stage.
Stage Three was a lot of fun. The shooter was stationary for two shots to T1. Then, the shooter moved diagonally toward cover while placing two rounds in T2 & T3 while moving. Then the shooter placed two rounds in T4-6 in tactical sequence from behind cover
We really hit our stride in putting together Stage Four. This one was a real sweetie. The shooter placed two shots by drawing and firing with retention into the upper left circle at a distance of 3 feet. Then, the shooter ran to cover while placing two shots each in T2-4. The two shots in T2 had to be head shots because of the hostage. After reaching cover, the shooter had to place one head shot in T5 and T6 and then one shot in the upper left Center of Mass circle of T7. This was a Limited Vickers for a total of 11 rounds. (The other three stages were Vickers.) My best time on this stage was 9.19 seconds with all "zeros!" After four tries, Gary got his time down to 9.37 with all "zeros." It was a really fun stage.
Gary had never drawn and fired with retention. Here he is shown practicing the firing position.
After shooting the four stages, we also had a lot of fun with the 1917. The revolver is very accurate at 7 yards. Gary is very strong. He shot first and his first group at 7 yards was two inches. After the sixth shot he kept clicking through for another shot. I said, "You're done, Gary." And he turned and said, "I thought it was a .22 and there would be 9 rounds!" Very funny, Gary! There is a difference between the recoil of a .22 LR and a .45 ACP. But to Gary, the pistol felt as comfortable as a .22. Go figure.
A .22, huh?
Here's Gary's best group at 10 yards. Pretty spiffy shooting, Gary! I definitely didn't do as well as Gary did with the 1917 but I wasn't displeased with my shooting. I'd give my shooting a B grade and Gary's an A+ at the short distance.
Happy Shooting, jp
Wednesday, December 7, 2011
Light weight IDPA cover
We saw a great lightweight cover structure at the IDPA Classifier at the Phoenix Rod & Gun Club on November 26. We took numerous photos of it and decided to try to build one ourselves. Naturally, however, we wanted to do so for the least possible cost. We were able to put the cover structure below together for a grand total of $5. There are captions below each photo.
Here is the two-foot-wide cover structure as the shooter would see it. We used a two foot by four foot piece of plywood for the base so there would be minimal chances for the shooter to stumble on the support structure for the cover.
This is the side that would face downrange. Actually, either side could be used to face the shooter.
This is a close up photo of the base. The 2x4's are screwed to the plywood from the bottom side. A piece of OSB was added for stability of the 2x4's. Note that holes for anchor nails have been placed in all four corners.
We put a piece of old serpentine belt on the base as a carry handle.
The top is exceptionally light weight and could be carried by virtually anyone.
The serpentine belt handle makes it very easy to transport the base. The next phase of this project will be to water seal all of the wood.
Here is the two-foot-wide cover structure as the shooter would see it. We used a two foot by four foot piece of plywood for the base so there would be minimal chances for the shooter to stumble on the support structure for the cover.
This is the side that would face downrange. Actually, either side could be used to face the shooter.
This is a close up photo of the base. The 2x4's are screwed to the plywood from the bottom side. A piece of OSB was added for stability of the 2x4's. Note that holes for anchor nails have been placed in all four corners.
We put a piece of old serpentine belt on the base as a carry handle.
The top is exceptionally light weight and could be carried by virtually anyone.
The serpentine belt handle makes it very easy to transport the base. The next phase of this project will be to water seal all of the wood.
Sunday, November 20, 2011
The Phoenix IDPA
We've been looking forward to participating in a Phoenix Rod & Gun Club IDPA match. Their club is awesome. Some of the top IDPA shooters in America call this club home. Twenty of the 25 shooters in the November 19th match were ranked as marksmen or higher by the IDPA Classifier. Twelve of the shooters were ranked as Sharpshooter or Expert. The Experts really are experts and it was a delight to watch them shoot. My shooting time was 120.67 seconds for the four-stage match. The fastest expert time was 51.88 seconds! It's really incredible to see someone shoot an IDPA stage that fast.
The R&G Club IDPA is a very well established outfit. Their stage designs were totally pro and well run. The club has all sorts of props with which to set up creative stages. Everything's extraordinarily organized and tidy as can be. There's a roomy shade ramada and nice tables and chairs and the whole place exudes a real "clubby" atmosphere. The club members were very hospitable to me as well as to each other. They even sang Happy Birthday to one of their members.
I enjoyed a big surprise during the match. A man I met online via a firearms forum actually came out to watch me shoot. We enjoyed gabbing all morning and it sure was fun. Between the hospitality of the local shooters and Justin's visit, I felt right at home. THANKS, Justin! (Justin took the photo at the top of this post.)
All-in-all, I felt my time was OK. I had a couple of glitches with the S&W M&P 9mm. After two reloads it didn't load a round from slide lock so I lost some time dealing with those minor malfunctions. In the photo above, take a look at my right leg. It's where it is supposed to be. Apparently, though, it was sticking out past the right barrel when I first ran over there. They gave me a procedural penalty for the exposure of that leg. That adds 3 seconds. There was another procedural penalty that added 3 seconds, too. So, if the pistol would have function properly and I could have avoided those two penalties, I think my time would have been around 105-110 seconds.
Interestingly, I ranked 7th overall in terms of accuracy--which is known as "Points Down" in IDPA parlance.
I had 12 points down. There were only 6 shooters with fewer "Points Down" than me. As Bill O. up in Idaho Falls like to say, "Work on accuracy first and then worry about your speed and time." If I can't be fast, at least I like to think I can be accurate!
I learned a lot of interesting new perspectives at the Phoenix R&G Club IDPA. I will be going back there November 26th to shoot in the monthly IDPA Classifier. We will take the Bonomo Custom 1911 and see if we can get classified as a Marksman. Currently, we are listed as "UNC" in the CDP Division. By participating in the Classifier match the very least we will be is an official "Novice." Frankly, after watching those Experts & Sharpshooters yesterday we will be a novice forever compared to those guys and gals.
Happy Shooting, jp
The R&G Club IDPA is a very well established outfit. Their stage designs were totally pro and well run. The club has all sorts of props with which to set up creative stages. Everything's extraordinarily organized and tidy as can be. There's a roomy shade ramada and nice tables and chairs and the whole place exudes a real "clubby" atmosphere. The club members were very hospitable to me as well as to each other. They even sang Happy Birthday to one of their members.
I enjoyed a big surprise during the match. A man I met online via a firearms forum actually came out to watch me shoot. We enjoyed gabbing all morning and it sure was fun. Between the hospitality of the local shooters and Justin's visit, I felt right at home. THANKS, Justin! (Justin took the photo at the top of this post.)
All-in-all, I felt my time was OK. I had a couple of glitches with the S&W M&P 9mm. After two reloads it didn't load a round from slide lock so I lost some time dealing with those minor malfunctions. In the photo above, take a look at my right leg. It's where it is supposed to be. Apparently, though, it was sticking out past the right barrel when I first ran over there. They gave me a procedural penalty for the exposure of that leg. That adds 3 seconds. There was another procedural penalty that added 3 seconds, too. So, if the pistol would have function properly and I could have avoided those two penalties, I think my time would have been around 105-110 seconds.
Interestingly, I ranked 7th overall in terms of accuracy--which is known as "Points Down" in IDPA parlance.
I had 12 points down. There were only 6 shooters with fewer "Points Down" than me. As Bill O. up in Idaho Falls like to say, "Work on accuracy first and then worry about your speed and time." If I can't be fast, at least I like to think I can be accurate!
I learned a lot of interesting new perspectives at the Phoenix R&G Club IDPA. I will be going back there November 26th to shoot in the monthly IDPA Classifier. We will take the Bonomo Custom 1911 and see if we can get classified as a Marksman. Currently, we are listed as "UNC" in the CDP Division. By participating in the Classifier match the very least we will be is an official "Novice." Frankly, after watching those Experts & Sharpshooters yesterday we will be a novice forever compared to those guys and gals.
Happy Shooting, jp
Tuesday, November 15, 2011
Heavy Metal Bullets
We spend six months each year in Idaho and six months in Arizona. Up in Idaho we shoot in both the IDPA and ICORE clubs. There are some really fine shooters in each venue. This summer, we learned much from many helpful shooters. We were particularly interested in learning about cast lead bullets. Several of the shooters Missouri Bullets. One of the shooters, however, uses Heavy Metal Bullets out of Scottsdale, Arizona.
Trent C., the shooter who recommended Heavy Metal Bullets competes with a 1911 in IDPA. He's really fast and accurate and makes it all look so easy. I was impressed the very first time I saw him shoot and my respect for his skills only continued to grow as the season went on. Trent swears by Heavy Metal Bullets. He loves them.
I checked out the Heavy Metal Bullets website and found it to be a really fun little website. It's nothing fancy bu there are some fun comments on the website. By and by, we purchased a Colt M1917 .45 ACP revolver. Everyone told us to use cast lead bullets. Our thoughts turned to Heavy Metal Bullets and we ordered 500 of their 200 grain semi-wad cutter with the bevel base. Owner William Simmons runs a one man shop but he is really dedicated to customer service. He is very prompt in replying to emails and very helpful. When I talked with him on the phone he was really gracious and didn't mind me asking my typical dumb questions. Ordering online was a piece of cake and the website calculated Arizona sales tax properly. I was able use Pay Pal for the payment, something I very much appreciated. Total "out the door" delivered cost of those 500 bullets was a wee bit less than $50. The bullets themselves were $45, tax was $3.58 and shipping was free.
I ordered the bullets on a Thursday and picked them up at the Post Office Saturday. Friday was Veterans Day but I'm guessing they would have been delivered Friday if the Post Office as open.
The bullets shoot great in the M1917 but they don't load well with moon clips. They get hung up on the shoulders of the semi-cutter geometry. Once they are in the cylinder they are great to shoot on 5.4 grains of Unique with CCI #300 primers. The friend who built my 1911 told me to use them in the 1911. He said I would be surprised. Boy, was he ever right!
Since I received the custom 1911 this summer, I have been using 185 grain hollow base plated Berry's bullets from St. George, Utah. Now, I will be only using Heavy Metal Bullets in the 1911. They feed like a dream and they are SOOOO accurate in that 1911. They are a dream to use in reloading. I am an old-fashioned reloader who uses a Lee "O" press, (AKA: The Challenger). Anyway, I use a walnut loading block and typically line up 25 rounds to charge with powder. I can now easily place 25 of the Heavy Metal Bullets in the belled mouths of those casings with now problem. This saves me a gob of time and makes reloading so much easier. The bullets seat well and they feed like the proverbial butter and fire as smooth as silk. There is no leading in the Bar-Sto barrel of the 1911. I am very pleased.
Today I received a followup email from William Simmons wondering if I had received the bullets. I decided to write this blog post to commend him on a "job well done" in casting, sizing and lubing lead bullets. I will now place my loaded Berry's bullets on the back burner and use them only when I don't have anything else to shoot. I will be shooting in an IDPA match in Phoenix November 19th and really look forward to using the Heavy Metal Bullets there. If anyone asks what I am using, I sure will be happy to tell them my high regard for Heavy Metal Bullets.
It's ironic that I started using the Heavy Metal Bullets in the 1911 only because I was looking for something to use in the M1917. Everything works out for a good purpose--no doubt about it. Thanks, William for your great customer service. There's no doubt I will be a loyal customer for a long time to come.
Click here to visit the Heavy Metal Bullets website.
Have a great day & Happy Shooting, jp
Trent C., the shooter who recommended Heavy Metal Bullets competes with a 1911 in IDPA. He's really fast and accurate and makes it all look so easy. I was impressed the very first time I saw him shoot and my respect for his skills only continued to grow as the season went on. Trent swears by Heavy Metal Bullets. He loves them.
I checked out the Heavy Metal Bullets website and found it to be a really fun little website. It's nothing fancy bu there are some fun comments on the website. By and by, we purchased a Colt M1917 .45 ACP revolver. Everyone told us to use cast lead bullets. Our thoughts turned to Heavy Metal Bullets and we ordered 500 of their 200 grain semi-wad cutter with the bevel base. Owner William Simmons runs a one man shop but he is really dedicated to customer service. He is very prompt in replying to emails and very helpful. When I talked with him on the phone he was really gracious and didn't mind me asking my typical dumb questions. Ordering online was a piece of cake and the website calculated Arizona sales tax properly. I was able use Pay Pal for the payment, something I very much appreciated. Total "out the door" delivered cost of those 500 bullets was a wee bit less than $50. The bullets themselves were $45, tax was $3.58 and shipping was free.
I ordered the bullets on a Thursday and picked them up at the Post Office Saturday. Friday was Veterans Day but I'm guessing they would have been delivered Friday if the Post Office as open.
The bullets shoot great in the M1917 but they don't load well with moon clips. They get hung up on the shoulders of the semi-cutter geometry. Once they are in the cylinder they are great to shoot on 5.4 grains of Unique with CCI #300 primers. The friend who built my 1911 told me to use them in the 1911. He said I would be surprised. Boy, was he ever right!
Since I received the custom 1911 this summer, I have been using 185 grain hollow base plated Berry's bullets from St. George, Utah. Now, I will be only using Heavy Metal Bullets in the 1911. They feed like a dream and they are SOOOO accurate in that 1911. They are a dream to use in reloading. I am an old-fashioned reloader who uses a Lee "O" press, (AKA: The Challenger). Anyway, I use a walnut loading block and typically line up 25 rounds to charge with powder. I can now easily place 25 of the Heavy Metal Bullets in the belled mouths of those casings with now problem. This saves me a gob of time and makes reloading so much easier. The bullets seat well and they feed like the proverbial butter and fire as smooth as silk. There is no leading in the Bar-Sto barrel of the 1911. I am very pleased.
Today I received a followup email from William Simmons wondering if I had received the bullets. I decided to write this blog post to commend him on a "job well done" in casting, sizing and lubing lead bullets. I will now place my loaded Berry's bullets on the back burner and use them only when I don't have anything else to shoot. I will be shooting in an IDPA match in Phoenix November 19th and really look forward to using the Heavy Metal Bullets there. If anyone asks what I am using, I sure will be happy to tell them my high regard for Heavy Metal Bullets.
It's ironic that I started using the Heavy Metal Bullets in the 1911 only because I was looking for something to use in the M1917. Everything works out for a good purpose--no doubt about it. Thanks, William for your great customer service. There's no doubt I will be a loyal customer for a long time to come.
Click here to visit the Heavy Metal Bullets website.
Have a great day & Happy Shooting, jp
Monday, October 24, 2011
New holster for the Airweight
I bought this S&W .38 Special Airweight in 1974. It's a long story best told some other time. This little five shot has been with me through thick and thin. It's been underwater, in rainstorms, dropped in the mud, you name it, the little snubbie has been there, done that. Throughout this pistol's 39 years of service to me, I've never treated it to its own holster until this year. No kidding. It's never had a real holster before this summer.
I went out to Wally World and paid may $10-$12 for a cheap-o Blackhawk cordura holster. Well, that holster sucked Big Time. Not only that, it was right handed. I found an old IWB for the snubbie in a box of cast-off holsters and bought it for $10. Likewise, it was right-handed. I can draw from that holster but I sure can't reholster at all.
Well, the time finally came when I could stand it no longer. My Faithful sidekick just had to have its own customer holster. I didn't want a leather one as I spend too much time outside in what some people call "the elements." You know, stuff like rain, sleet, hail and, yes even snow. I really like carrying the pistol when I am hiking, especially during snake season. That's when I put three rounds of snake shot in it and along with two hollow points. Trouble is, I've never had a decent way of carrying the Airweight. What good would it do if it's in your pack when you need it? Um...it would be NO good whatsoever.
Well, a couple of guys I know through shooting in IDPA and ICORE told me about a local guy who builds custom Kydex holsters. His name is Rick Palmer and he runs Center of Mass Holsters. Click here for his website. A photo of Rick is at the bottom of all the holster photos. I told Rick I wanted a holster I could use in both IDPA and ICORE as well as one that would attach to the hip belt of a wide variety of day packs and even an larger overnight pack, too. Rick knew just what to do. I had to wait a few weeks but I got the call yesterday that it was done.
We went to Rick's place in Firth, Idaho, to pick it up this afternoon and it sure didn't disappoint. Rick took the time to use my very own pistol and custom adjust the holster so the retention pressure is perfect. It ain't gonna come out unless you draw it out and then it's smooth as silk.
The photo at the top shows how I would be wearing it with a regular belt. It is a slightly modified paddle holster so I don't have to be wearing a belt to use the holster. Being an Old Fat Guy, I often don't wear a belt so I really wanted a paddle holster than didn't have the huge paddles like Blackhawks do. It feels great for normal wear as shown in the top photo. It always draws out faster than I've ever been able to do in 39 years!
In the first photo below this write up, you see it on the hip belt of my favorite day pack. It does not interfere with my suspenders and pants and I can move it forward enough so the butt doesn't hit my arm when I am walking. The next couple of photos are closer views of it on the hip belt. The last photo shows how it attaches to the hip belt of a smaller day pack I often use. This is exactly the type of holster I was hoping to have for this old beater Airweight. I am very Happy. I highly recommend Center of Mass and look forward to having other holster made there soon. Thanks, Rick! Happy Shooting. jp
I went out to Wally World and paid may $10-$12 for a cheap-o Blackhawk cordura holster. Well, that holster sucked Big Time. Not only that, it was right handed. I found an old IWB for the snubbie in a box of cast-off holsters and bought it for $10. Likewise, it was right-handed. I can draw from that holster but I sure can't reholster at all.
Well, the time finally came when I could stand it no longer. My Faithful sidekick just had to have its own customer holster. I didn't want a leather one as I spend too much time outside in what some people call "the elements." You know, stuff like rain, sleet, hail and, yes even snow. I really like carrying the pistol when I am hiking, especially during snake season. That's when I put three rounds of snake shot in it and along with two hollow points. Trouble is, I've never had a decent way of carrying the Airweight. What good would it do if it's in your pack when you need it? Um...it would be NO good whatsoever.
Well, a couple of guys I know through shooting in IDPA and ICORE told me about a local guy who builds custom Kydex holsters. His name is Rick Palmer and he runs Center of Mass Holsters. Click here for his website. A photo of Rick is at the bottom of all the holster photos. I told Rick I wanted a holster I could use in both IDPA and ICORE as well as one that would attach to the hip belt of a wide variety of day packs and even an larger overnight pack, too. Rick knew just what to do. I had to wait a few weeks but I got the call yesterday that it was done.
We went to Rick's place in Firth, Idaho, to pick it up this afternoon and it sure didn't disappoint. Rick took the time to use my very own pistol and custom adjust the holster so the retention pressure is perfect. It ain't gonna come out unless you draw it out and then it's smooth as silk.
The photo at the top shows how I would be wearing it with a regular belt. It is a slightly modified paddle holster so I don't have to be wearing a belt to use the holster. Being an Old Fat Guy, I often don't wear a belt so I really wanted a paddle holster than didn't have the huge paddles like Blackhawks do. It feels great for normal wear as shown in the top photo. It always draws out faster than I've ever been able to do in 39 years!
In the first photo below this write up, you see it on the hip belt of my favorite day pack. It does not interfere with my suspenders and pants and I can move it forward enough so the butt doesn't hit my arm when I am walking. The next couple of photos are closer views of it on the hip belt. The last photo shows how it attaches to the hip belt of a smaller day pack I often use. This is exactly the type of holster I was hoping to have for this old beater Airweight. I am very Happy. I highly recommend Center of Mass and look forward to having other holster made there soon. Thanks, Rick! Happy Shooting. jp
The Sheath--A Universal Kydex ambi holster
The Sheath. It's a great new holster. It fits almost any popular polymer automatic pistol--most of the Glocks, XD, XDM, M&P, Taurus Mil Pro's, FNP's and many more. The Sheath's designer , Rick Palmer has been making custom Kydex holster for ten years and just sold his first Sheath last week. I am only the third person to own one of them and got it less than an hour ago.
Here's how I learned about the Sheath. Rick is the hard working owner of Center Of Mass, a well-respected maker of custom Kydex holsters for all kinds of uses and applications. I heard about Rick and his Center of Mass business from two people I shoot with at IDPA and ICORE. (Rick is shown in the photo below.)
I was impressed with the holsters Rick made for them so I asked him to make a left-handed paddle holster for my 1974 S&W .38 Special Airweight. He called yesterday and said it was ready so we went down to his place to pick it up. It's a beautiful custom holster that we will talk about in a separate Forum post. While we were talking holsters and such, Rick pulled out The Sheath and said, "Take a loot at this." He had an XDM in it but told me it would fit almost any polymer pistol.
The brilliance of his design caught my eye immediately. You can wear it on either side and you can easily adjust the cant. Meanwhile, the ingenious design provides IDPA-legal retention pressure and the pistol is definitely not going to drop out even when held upside down. I asked him if it would fit my M&P and he said he'd guaranteed that it would. So, even though I was really excited about my new L/H holster for the snubbie, I could hardly wait to get home and try the M&P 9mm in The Sheath. Man, it fits perfectly and I can hold The Sheath upside down and shake it and the pistol won't drop out. meanwhile, it fits like a hand in glove on my belt and I can draw and reholster smoothly. NO PROBLEM.
Now get this--Rick is selling these holster for $25--that's twenty five bucks. HUH? Yep, he said he wanted to make a holster that would help a lot of people use a lot of different firearms. If you're like me, you buy and sell various pistols on a whim. Likewise, when I am shooting up in Camp Verde with the guys, a lot of them offer to let me shoot their pistols and I do the same for them. Thjis holster will allow me to go to the firing line with their pistol in a holster where it belongs before loading and making ready. Likewise, I can now swap this holster out to my right-handed wife it will fit a wide variety of the pistols to which we have access. The thing is amazing and I can't see anything not to like about it, especially the price.
And Rick will ship the holster Priority Mail for a flat $5. So, you could get one of these holsters delivered for $30--out the door--since there wouldn't be any sales tax when shipped to Arizona.
I can hardly wait to show this puppy off in person to my shooting buddies. The Sheath ROX.
Here's Rick's Center of Mass website.
http://comholsters.com/index.php
If you want one, just email him and make arrangements--he can take a credit card over the phone.
Happy Shooting, jp
Here's how I learned about the Sheath. Rick is the hard working owner of Center Of Mass, a well-respected maker of custom Kydex holsters for all kinds of uses and applications. I heard about Rick and his Center of Mass business from two people I shoot with at IDPA and ICORE. (Rick is shown in the photo below.)
I was impressed with the holsters Rick made for them so I asked him to make a left-handed paddle holster for my 1974 S&W .38 Special Airweight. He called yesterday and said it was ready so we went down to his place to pick it up. It's a beautiful custom holster that we will talk about in a separate Forum post. While we were talking holsters and such, Rick pulled out The Sheath and said, "Take a loot at this." He had an XDM in it but told me it would fit almost any polymer pistol.
The brilliance of his design caught my eye immediately. You can wear it on either side and you can easily adjust the cant. Meanwhile, the ingenious design provides IDPA-legal retention pressure and the pistol is definitely not going to drop out even when held upside down. I asked him if it would fit my M&P and he said he'd guaranteed that it would. So, even though I was really excited about my new L/H holster for the snubbie, I could hardly wait to get home and try the M&P 9mm in The Sheath. Man, it fits perfectly and I can hold The Sheath upside down and shake it and the pistol won't drop out. meanwhile, it fits like a hand in glove on my belt and I can draw and reholster smoothly. NO PROBLEM.
Now get this--Rick is selling these holster for $25--that's twenty five bucks. HUH? Yep, he said he wanted to make a holster that would help a lot of people use a lot of different firearms. If you're like me, you buy and sell various pistols on a whim. Likewise, when I am shooting up in Camp Verde with the guys, a lot of them offer to let me shoot their pistols and I do the same for them. Thjis holster will allow me to go to the firing line with their pistol in a holster where it belongs before loading and making ready. Likewise, I can now swap this holster out to my right-handed wife it will fit a wide variety of the pistols to which we have access. The thing is amazing and I can't see anything not to like about it, especially the price.
And Rick will ship the holster Priority Mail for a flat $5. So, you could get one of these holsters delivered for $30--out the door--since there wouldn't be any sales tax when shipped to Arizona.
I can hardly wait to show this puppy off in person to my shooting buddies. The Sheath ROX.
Here's Rick's Center of Mass website.
http://comholsters.com/index.php
If you want one, just email him and make arrangements--he can take a credit card over the phone.
Happy Shooting, jp
Subscribe to:
Posts (Atom)







































